Skip to main content

ABOUT US

 

 WE HERE SHARING THEIR PERSONAL WORK EXPERIENCE__


I am working under Thermal Power Station in Andhra Pradesh India.

I am a Mechanical Engineering which is I working in field of Mechanical Department 

Boiler , Coal mill, Rotary Parts etc. 

I want to share my work experience to you guys.


Comments

Post a Comment

Popular posts from this blog

Condensate extraction pump in thermal power plant

WHAT IS CEP (CONDENSATE EXTRACTION PUMP) -  This pump is in actual efficiency booster in a thermal power plant. As we all know that very high temperature and pressure steam expands in a steam turbine and this expanded(low pressure and low temp) steam can go waste if CEP doesn't perform it's function. CEP pump circulate the -Condensate(conversion of steam into water in condenser) again into deaerator tank which prevent plant from a huge loss of water. This water can be used for making deaerator level. Condensate Extraction Pump, as the name suggests the CEP is required to extract the condensate from the Condenser. Condenser is the equipment where all the steam gets condensed and the condensate is extracted out of the same by CEPs. so where the Condensate goes after coming out of the condenser, so it goes to the DEAERATOR by moving through a series of LP heaters, where the temperature of the extracted condensate is increased to a certain degree. In deaerator the soluble gases are...
1 comment
Read more

Coal Firing Burner in thermal power plant

    COAL FIRING BURNER IN THERMAL POWER PLANT
Post a Comment
Read more

Boiler tube

                         THERMAL POWER PLANT BOILER TUBES A  water tube boiler  can be defined as a Steam  boiler  in which the flow of  water  in the  tubes , as well as hot gases, enclose the  tubes . Not like fire  tube boilers , this  boiler  attains high-pressures, as well as high-steam capabilities, can be achieved. The  steam  generators of the  660 MW  units would be 100%  coal  fired and would be rated to generate about 2170 t/hr each, of superheated  steam  at about 250 kg/ cm2 pressure and 568°C temperature. Reheat  steam  temperature would also be 568°C. Boiler Erection of Water Tubes...... How do I find a leak in my boiler tube? For detecting  boiler tube  leaks, plant operating engineers constantly monitor  boiler  furnace vacuum, which is maintained between a -10 to -20 mm water column...
1 comment
Read more